FRENES

Mini One PCD

2001–2006
VERIFIED
⌀56.1
PCD4x100 or 5x112
Centre bore56.1 or 66.5 mm
Offset (ET)ET45 to ET50
Fixing typeM12x1.50
Tightening torque120 Nm
Original tyres175/65R15
⚠ This model comes with 4x100 or 5x112 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mini One

A Mini One (2001–2006) uses a 4x100 or 5x112 PCD and a centre bore of 56.1 or 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 5x112 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET45 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.1 mm — ET45 —
Version 2 4x100 56.1 mm — ET50 175/65R15
Version 3 5x112 66.5 mm — ET46 175/65R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mini One without rings. Offset, width, diameter and caliper clearance still need checking.

Mini Coupe 2011–2015 Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007 Mini Cooper S 2001–2006 Mini Cooper 1959–2000 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006

Will wheels from another vehicle fit your One?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mini One?

A Mini One (2001–2006) can have a 4x100 or 5x112 PCD depending on the version: check on an original wheel.

Does a Mini One need a hub centric ring?

The centre bore (hub diameter) of a Mini One is 56.1 or 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mini One?

The recorded original offset is ET45 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mini One?

The specified tightening torque is 120 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mini One?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Mini Coupe, Mini Cooper Clubman, Mini Cooper Clubman S, Mini Cooper S. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.