FRENES

Opel Insignia B PCD

2017–2022
VERIFIED
⌀70.2
PCD5x115
Centre bore70.2 mm
Offset (ET)ET40 to ET49
Fixing typeM12x1.5
Tightening torque125 Nm
Original tyres215/60R16, 215/55R17, 225/55R17, 235/45R18
Moteurs 1.5 Turbo, 1.6 Turbo, 1.6 D, 2.0 D ; la 2.0 Turbo 4x4 et la GSi sont en 5x120 (fiche séparée).
Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Insignia B

A Opel Insignia B (2017–2022) uses a 5x115 PCD and a centre bore of 70.2 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x115 required. See all vehicles with 5x115.
  • Centre bore: the wheel must have a centre bore of 70.2 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.2 mm.
  • Offset: the original is ET40 to ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 125 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R16, 215/55R17, 225/55R17, 235/45R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (7)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x115 70.2 mm 6.5Jx16 ET41 215/60R16
Version 2 5x115 70.2 mm 7Jx16 ET40 215/60R16
Version 3 5x115 70.2 mm 7Jx17 ET44 215/55R17
Version 4 5x115 70.2 mm 7.5Jx17 ET45 225/55R17
Version 5 5x115 70.2 mm 7.5Jx18 ET41 235/45R18
Version 6 5x115 70.2 mm 8.5Jx18 ET49 245/45R18
Version 7 5x115 70.2 mm 8.5Jx19 ET49 245/40R19

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 70.2 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Insignia B without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Insignia 2008–2017

Will wheels from another vehicle fit your Insignia B?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Insignia B?

A Opel Insignia B (2017–2022) has a PCD of 5x115: 5 studs or bolts spaced around a circle 115 mm in diameter.

Does a Opel Insignia B need a hub centric ring?

The centre bore (hub diameter) of a Opel Insignia B is 70.2 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Insignia B?

The recorded original offset is ET40 to ET49 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Insignia B?

The specified tightening torque is 125 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Insignia B?

With the same PCD (5x115) and the same centre bore (70.2 mm), these include: Opel Insignia. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.