FRENES

Opel Insignia B 2.0 Turbo 4x4, GSi PCD

2017–2022
VERIFIED
⌀67.1
PCD5x120
Centre bore67.1 mm
Offset (ET)ET41 to ET49
Fixing typeM14x1.5
Tightening torque190 Nm
Original tyres235/45R18, 245/40R19, 245/35R20
Seulement les 2.0 Turbo 260 ch 4x4 et GSi (essence et 2.0 BiTurbo D) ; le reste de la gamme est en 5x115.
Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Insignia B 2.0 Turbo 4x4, GSi

A Opel Insignia B 2.0 Turbo 4x4, GSi (2017–2022) uses a 5x120 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120 required. See all vehicles with 5x120.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET41 to ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 190 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/45R18, 245/40R19, 245/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x120 67.1 mm 8Jx18 ET41 235/45R18
Version 2 5x120 67.1 mm 8.5Jx19 ET49 245/40R19
Version 3 5x120 67.1 mm 8.5Jx20 ET49 245/35R20

Will wheels from another vehicle fit your Insignia B 2.0 Turbo 4x4, GSi?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Insignia B 2.0 Turbo 4x4, GSi?

A Opel Insignia B 2.0 Turbo 4x4, GSi (2017–2022) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Opel Insignia B 2.0 Turbo 4x4, GSi need a hub centric ring?

The centre bore (hub diameter) of a Opel Insignia B 2.0 Turbo 4x4, GSi is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Insignia B 2.0 Turbo 4x4, GSi?

The recorded original offset is ET41 to ET49 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Insignia B 2.0 Turbo 4x4, GSi?

The specified tightening torque is 190 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Insignia B 2.0 Turbo 4x4, GSi?

With the same PCD (5x120) and the same centre bore (67.1 mm), these include: Opel Insignia Country Tourer, Opel Insignia, Opel Insignia OPC, MG Marvel R. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.