Opel Antara PCD

2006–2014

VERIFIED

Centre bore70.3 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.50

Tightening torque140 Nm

Hub centric rings 70.3 mm → Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Antara

A Opel Antara (2006–2014) uses a 5x115 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x115 required. See all vehicles with 5x115.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Antara without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Cascada 2013–2019 Opel Ampera from 2012 Opel Zafira Tourer 2011–2018 Opel Astra J 1.6T, 1.7D, 2.0D 2009–2015 Opel Sintra 1997–1999 Cadillac ATS 2013–2019 Chevrolet Volt from 2012 Holden Cruze Wagon Diesel from 2012 Holden Volt from 2012 Chevrolet Orlando 2011–2014 GMC Terrain 2010–2018 Chevrolet Cruze Diesel from 2009 Holden Cruze Diesel from 2009 Saturn Vue 2007–2010 Buick Lucerne 2006–2011 Chevrolet Captiva from 2006

Will wheels from another vehicle fit your Antara?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x115 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Opel Insignia ⌀70.2 Dodge Challenger ⌀71.6 Dodge Charger ⌀71.6 Chrysler 300C ⌀71.6 Chrysler 300C 4x4 ⌀71.6 Dodge Magnum ⌀71.6 Dodge Magnum 4x4 ⌀71.6 Lancia Thema ⌀71.5

Frequently asked questions

What is the PCD of a Opel Antara?

A Opel Antara (2006–2014) has a PCD of 5x115: 5 studs or bolts spaced around a circle 115 mm in diameter.

Does a Opel Antara need a hub centric ring?

The centre bore (hub diameter) of a Opel Antara is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Antara?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Antara?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Antara?

With the same PCD (5x115) and the same centre bore (70.3 mm), these include: Opel Cascada, Opel Ampera, Opel Zafira Tourer, Opel Astra J 1.6T, 1.7D, 2.0D. Offset, width and rim diameter still need checking for each vehicle.

Other Opel models

Rocks-E 4x108 Zafira Life 5x108 Corsa F 4x108 Crossland X 4x108 Ampera-e 5x105 Grandland X 5x108 Adam S 5x110 Karl 4x100 Astra K 5x105 Adam Rocks 4x100 Corsa E 4x100 Cascada 5x115 All Opel →

Does a value look wrong, or is a version missing? Let us know, we check every report.