Peugeot 3008 III PHEV / e-3008 PCD

from 2023

VERIFIED

Centre bore65.1 mm

Offset (ET)ET43

Fixing typeM14x1.5

Original tyres235/55R19, 235/50R20

Entraxe 5x114.3 et M14x1.5 pour PHEV et électrique (tirewheelguide 2025 + Brock « 5x114, 65,1, montage OE » pour e-3008/PHEV). wheelmeasure ne distingue pas ces versions (5x108). Koleso n'affiche pas le PCD.

Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 3008 III PHEV / e-3008

A Peugeot 3008 III PHEV / e-3008 (from 2023) uses a 5x114.3 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
Offset: the original is ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/55R19, 235/50R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Peugeot 3008

Previous generation: Peugeot 3008 II (2016–2023) — the bolt pattern changes (5x114.3 instead of 5x108): the wheels are not interchangeable.

3008 I 2009–2016 · 4x108 3008 II 2016–2023 · 5x108 3008 III from 2023 · 5x108 3008 III PHEV / e-3008 from 2023

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
PHEV 195, e-3008 211/230 ch	5x114.3	65.1 mm	8Jx19	ET43	235/55R19
PHEV 195, e-3008 211/230 ch	5x114.3	65.1 mm	8Jx20	ET43	235/50R20

Will wheels from another vehicle fit your 3008 III PHEV / e-3008?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Peugeot 4008 ⌀67.1 Peugeot 4007 ⌀67.1 Dacia Bigster ⌀66.1 Hyundai Ioniq 9 ⌀67.1 Kia EV5 ⌀67.1 Leapmotor B10 ⌀66.6 Mazda CX-5 III ⌀67.1 Mitsubishi Outlander IV ⌀66.1

Frequently asked questions

What is the PCD of a Peugeot 3008 III PHEV / e-3008?

A Peugeot 3008 III PHEV / e-3008 (from 2023) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Peugeot 3008 III PHEV / e-3008 need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 3008 III PHEV / e-3008 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 3008 III PHEV / e-3008?

The recorded original offset is ET43 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Other Peugeot models

e-208 4x108 408 5x108 308 III 5x108 208 II 4x108 2008 II 4x108 Rifter 5x108 508 II 5x108 5008 II 5x108 Traveller 5x108 Expert III 5x108 All Peugeot →

Does a value look wrong, or is a version missing? Let us know, we check every report.