FRENES

Peugeot 304 PCD

1969–1980
VERIFIED
⌀63.5
PCD3x105
Centre bore63.5 mm
Offset (ET)ET23
Fixing typeEcrous - 12x1.25
Original tyres165/65R15
Hub centric rings 63.5 mm → Wheel spacers 3x105(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 304

A Peugeot 304 (1969–1980) uses a 3x105 PCD and a centre bore of 63.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 3x105 required. See all vehicles with 3x105.
  • Centre bore: the wheel must have a centre bore of 63.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.5 mm.
  • Offset: the original is ET23. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 165/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 3x105 PCD and same 63.5 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot 304 without rings. Offset, width, diameter and caliper clearance still need checking.

Peugeot 305 1977–1982 Peugeot 204 1965–1977

Will wheels from another vehicle fit your 304?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Peugeot 304?

A Peugeot 304 (1969–1980) has a PCD of 3x105: 3 studs or bolts spaced around a circle 105 mm in diameter.

Does a Peugeot 304 need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 304 is 63.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 304?

The recorded original offset is ET23. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Peugeot 304?

With the same PCD (3x105) and the same centre bore (63.5 mm), these include: Peugeot 305, Peugeot 204. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.