FRENES

Renault Espace 2 PCD

1991–1996
VERIFIED
⌀60.1
PCD5x108
Centre bore60.1 mm
Offset (ET)ET42
Fixing typeM14x1.50
Tightening torque100 Nm
Hub centric rings 60.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Espace 2

A Renault Espace 2 (1991–1996) uses a 5x108 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET42. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Espace 2 without rings. Offset, width, diameter and caliper clearance still need checking.

Renault Kangoo 2 5 trou 2008–2013 Renault Clio Sport 2006–2013 Renault Megane 2.0 dCi 2005–2008 Renault Espace IV 2002–2015 Renault Avantime 2001–2003 Renault VelSatis 2001–2009 Renault Laguna 2 2000–2007 Renault Megane Scenic RX-4 2000–2003 Renault Kangoo 1998–2007 Renault Espace 3 1997–2002 Renault Laguna 1 5 trou 1994–2000 Renault Safrane V6 1992–2000 Renault 21 5 trou 1986–1995 Nissan NV250 2019–2022 Mercedes Citan from 2012

Will wheels from another vehicle fit your Espace 2?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Renault Espace 2?

A Renault Espace 2 (1991–1996) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Renault Espace 2 need a hub centric ring?

The centre bore (hub diameter) of a Renault Espace 2 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Espace 2?

The recorded original offset is ET42. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Espace 2?

The specified tightening torque is 100 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Renault Espace 2?

With the same PCD (5x108) and the same centre bore (60.1 mm), these include: Renault Kangoo 2 5 trou, Renault Clio Sport, Renault Megane 2.0 dCi, Renault Espace IV. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.