FRENES

Roller Team Livingstone PCD

from 2007
VERIFIED
⌀71.1
PCD5x118
Centre bore71.1 mm
Offset (ET)ET68
Fixing typeM14x1.50
Tightening torque160 Nm
Original tyres205/70R15
Hub centric rings 71.1 mm → Wheel spacers 5x118(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Roller Team Livingstone

A Roller Team Livingstone (from 2007) uses a 5x118 PCD and a centre bore of 71.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x118 required. See all vehicles with 5x118.
  • Centre bore: the wheel must have a centre bore of 71.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.1 mm.
  • Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x118 PCD and same 71.1 mm centre bore: wheels from these vehicles bolt on and centre on a Roller Team Livingstone without rings. Offset, width, diameter and caliper clearance still need checking.

Roller Team Zefiro Fiat Ducato from 2019 Roller Team Kronos Fiat Ducato from 2018 Roller Team Granduca from 2007 Laika Kosmo V5 2020–2024 Laika Kosmo V9 2020–2024 Nissan Primastar 2001–2015 Opel Vivaro 2001–2014 Iveco Daily Single 1999–2006 Citroen Jumper 1994–2006 Citroen Relay 1994–2006 Peugeot Boxer 1994–2001 Fiat Ducato 1982–1990 Renault Trafic 1980–2001

Will wheels from another vehicle fit your Livingstone?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Roller Team Livingstone?

A Roller Team Livingstone (from 2007) has a PCD of 5x118: 5 studs or bolts spaced around a circle 118 mm in diameter.

Does a Roller Team Livingstone need a hub centric ring?

The centre bore (hub diameter) of a Roller Team Livingstone is 71.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Roller Team Livingstone?

The recorded original offset is ET68. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Roller Team Livingstone?

The specified tightening torque is 160 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Roller Team Livingstone?

With the same PCD (5x118) and the same centre bore (71.1 mm), these include: Roller Team Zefiro Fiat Ducato, Roller Team Kronos Fiat Ducato, Roller Team Granduca, Laika Kosmo V5. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.