FRENES

Fiat Ducato III PCD

from 2006
VERIFIED
⌀71.1
PCD5x118
Centre bore71.1 mm
Offset (ET)ET68
Fixing typeM14x1.5
Original tyres205/70R15, 215/70R15, 225/70R15
X250 puis X290, versions légères (30/33) et E-Ducato. Les Maxi (35) sont en 5x130, voir Ducato III Maxi.
Wheel spacers 5x118(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fiat Ducato III

A Fiat Ducato III (from 2006) uses a 5x118 PCD and a centre bore of 71.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x118 required. See all vehicles with 5x118.
  • Centre bore: the wheel must have a centre bore of 71.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.1 mm.
  • Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R15, 215/70R15, 225/70R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x118 71.1 mm 6Jx15 ET68 205/70R15
Version 2 5x118 71.1 mm 6Jx15 ET68 215/70R15
Version 3 5x118 71.1 mm 6Jx15 ET68 225/70R15

Vehicles with the same PCD and centre bore

Same 5x118 PCD and same 71.1 mm centre bore: wheels from these vehicles bolt on and centre on a Fiat Ducato III without rings. Offset, width, diameter and caliper clearance still need checking.

Fiat Ducato 1982–1990 Laika Kosmo V5 2020–2024 Laika Kosmo V9 2020–2024 Roller Team Zefiro Fiat Ducato from 2019 Roller Team Kronos Fiat Ducato from 2018 Roller Team Granduca from 2007 Roller Team Livingstone from 2007 Citroen Jumper II from 2006 Nissan Primastar 2001–2015 Opel Vivaro 2001–2014 Renault Trafic II 2001–2014 Iveco Daily Single 1999–2006 Citroen Jumper 1994–2006 Citroen Relay 1994–2006 Peugeot Boxer 1994–2001 Renault Trafic 1980–2001

Will wheels from another vehicle fit your Ducato III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Fiat Ducato III?

A Fiat Ducato III (from 2006) has a PCD of 5x118: 5 studs or bolts spaced around a circle 118 mm in diameter.

Does a Fiat Ducato III need a hub centric ring?

The centre bore (hub diameter) of a Fiat Ducato III is 71.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fiat Ducato III?

The recorded original offset is ET68 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Fiat Ducato III?

With the same PCD (5x118) and the same centre bore (71.1 mm), these include: Fiat Ducato, Laika Kosmo V5, Laika Kosmo V9, Roller Team Zefiro Fiat Ducato. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.