Subaru Justy PCD

1984–1994
VERIFIED
⌀59.1
Centre bore59.1 or 60.1 or 54.1 mm
Offset (ET)ET40 to ET45
Fixing typeEcrous - 12x1.25
Tightening torque78-98 Nm
Original tyres165/65R13, 155/70R13
⚠ This model comes with 4x100 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Subaru Justy

A Subaru Justy (1984–1994) uses a 4x100 or 4x114.3 PCD and a centre bore of 59.1 or 60.1 or 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 4x114.3 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 59.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.1 mm.
  • Offset: the original is ET40 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 78-98 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 165/65R13, 155/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 59.1 mm — ET45 165/65R13
Version 2 4x114.3 60.1 mm — ET45 155/70R13
Version 3 4x100 54.1 mm — ET40 —

Will wheels from another vehicle fit your Justy?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Subaru Justy?

A Subaru Justy (1984–1994) can have a 4x100 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Subaru Justy need a hub centric ring?

The centre bore (hub diameter) of a Subaru Justy is 59.1 or 60.1 or 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Subaru Justy?

The recorded original offset is ET40 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Subaru Justy?

The specified tightening torque is 78-98 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Subaru Justy?

With the same PCD (4x100) and the same centre bore (59.1 mm), these include: Subaru Vivio, Nissan Almera N15, Nissan Figaro, Nissan 100NX. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.