Subaru B9 Tribeca PCD

2005–2014

VERIFIED

Centre bore56.1 mm

Offset (ET)ET55

Fixing typeEcrous - 12x1.25

Tightening torque120 Nm

Hub centric rings 56.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Subaru B9 Tribeca

A Subaru B9 Tribeca (2005–2014) uses a 5x114.3 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Subaru B9 Tribeca without rings. Offset, width, diameter and caliper clearance still need checking.

Subaru Crosstrek from 2022 Subaru Ascent from 2019 Subaru Levorg 2014–2022 Subaru WRX STI from 2013 Subaru Impreza WRX STi 2000–2005 Subaru Outback 1998–2003 Subaru Forester 1997–2002 Subaru SVX 1992–1997 Subaru Legacy 1989–2003

Will wheels from another vehicle fit your B9 Tribeca?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Subaru Solterra ⌀60.1 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1

Frequently asked questions

What is the PCD of a Subaru B9 Tribeca?

A Subaru B9 Tribeca (2005–2014) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Subaru B9 Tribeca need a hub centric ring?

The centre bore (hub diameter) of a Subaru B9 Tribeca is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Subaru B9 Tribeca?

The recorded original offset is ET55. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Subaru B9 Tribeca?

The specified tightening torque is 120 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Subaru B9 Tribeca?

With the same PCD (5x114.3) and the same centre bore (56.1 mm), these include: Subaru Crosstrek, Subaru Ascent, Subaru Levorg, Subaru WRX STI. Offset, width and rim diameter still need checking for each vehicle.

Other Subaru models

Crosstrek 5x114.3 Solterra 5x114.3 Ascent 5x114.3 Levorg 5x114.3 WRX STI 5x114.3 BRZ 5x100 XV 5x100 Trezia 5x100 Baja 5x100 Impreza WRX STi 5x100 Outback 5x100 Forester 5x100 All Subaru →

Does a value look wrong, or is a version missing? Let us know, we check every report.