Nissan Almera N15 PCD

1995–2000

VERIFIED

Centre bore59.1 mm

Offset (ET)ET35

Fixing typeEcrous - 12x1.25

Tightening torque110 Nm

Hub centric rings 59.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Almera N15

A Nissan Almera N15 (1995–2000) uses a 4x100 PCD and a centre bore of 59.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 59.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.1 mm.
Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 59.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Almera N15 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Figaro 1991–1992 Nissan 100NX 1990–1996 Nissan Sunny 1986–1991 Nissan Micra K10 1982–1992 Subaru Vivio 1992–2001 Subaru Justy 1984–1994

Will wheels from another vehicle fit your Almera N15?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 59.1 mm, and will not fit if it is smaller.

Nissan Dayz ⌀56.1 Nissan Micra K14 ⌀60.1 Nissan Almera ⌀60.1 Nissan Pixo ⌀54.1 Nissan Note ⌀60.1 Nissan Kubistar ⌀60.1 Nissan Micra K12 ⌀60.1 Nissan Cube ⌀60.1

Frequently asked questions

What is the PCD of a Nissan Almera N15?

A Nissan Almera N15 (1995–2000) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Nissan Almera N15 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Almera N15 is 59.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Almera N15?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Almera N15?

The specified tightening torque is 110 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Almera N15?

With the same PCD (4x100) and the same centre bore (59.1 mm), these include: Nissan Figaro, Nissan 100NX, Nissan Sunny, Nissan Micra K10. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Townstar 5x114.3 Qashqai J12 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.