A Subaru BRZ (from 2012) uses a 5x100 PCD and a centre bore of 56.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Subaru BRZ without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.
A Subaru BRZ (from 2012) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.
Does a Subaru BRZ need a hub centric ring?
The centre bore (hub diameter) of a Subaru BRZ is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Subaru BRZ?
The recorded original offset is ET48. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Subaru BRZ?
The specified tightening torque is 120 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Subaru BRZ?
With the same PCD (5x100) and the same centre bore (56.1 mm), these include: Subaru XV, Subaru Baja, Subaru Impreza WRX STi, Subaru Outback. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more