Volkswagen Scirocco II PCD

1981–1993

VERIFIED

Centre bore57.1 mm

Offset (ET)ET38

Fixing typeM12x1.50

Tightening torque110 Nm

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Scirocco II

A Volkswagen Scirocco II (1981–1993) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Scirocco II without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Volkswagen Up 2011–2023 Volkswagen Lupo GTI 2002–2005 Volkswagen Lupo 1998–2005 Volkswagen Vento 1992–1998 Volkswagen Golf 3 1991–1997 Volkswagen Corrado 1988–1996 Volkswagen Fox 1987–1993 Volkswagen Golf 2 1983–1992 Volkswagen Passat 4 trou 1983–1996 Volkswagen Caddy 1982–1992 Volkswagen Jetta 1979–1984 Volkswagen Polo 1 1975–1981 Volkswagen Golf 1 1974–1983

Will wheels from another vehicle fit your Scirocco II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Volkswagen Scirocco II?

A Volkswagen Scirocco II (1981–1993) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Volkswagen Scirocco II need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Scirocco II is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Scirocco II?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Scirocco II?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen Scirocco II?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Volkswagen XL1, Volkswagen Cross Up, Volkswagen e-Up, Volkswagen Up. Offset, width and rim diameter still need checking for each vehicle.

Other Volkswagen models

Transporter T7 6x120 Tayron 5x112 Passat B9 5x112 ID.7 5x112 ID.Buzz axe arrière 5x112 ID.Buzz axe avant 5x112 ID.5 axe avant 5x112 ID.5 axe arrière 5x112 ID.6 X axe arrière 5x112 Taigo 5x100 ID.6 Crozz axe arrière 5x112 ID.6 Crozz axe avant 5x112 All Volkswagen →

Does a value look wrong, or is a version missing? Let us know, we check every report.