Volkswagen Transporter T7 PCD

from 2025

VERIFIED

Centre bore74.5 mm

Offset (ET)ET50

Fixing typeEcrous - 14x1.50

Tightening torque180 Nm

Original tyres215/60R17

Hub centric rings 74.5 mm → Wheel spacers 6x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Transporter T7

A Volkswagen Transporter T7 (from 2025) uses a 6x120 PCD and a centre bore of 74.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x120 required. See all vehicles with 6x120.
Centre bore: the wheel must have a centre bore of 74.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 74.5 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 180 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/60R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your Transporter T7?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 74.5 mm, and will not fit if it is smaller.

Cadillac XT6 ⌀66.9 Cadillac XT5 ⌀66.9 Saab 9-4X ⌀66.9 GMC Acadia ⌀66.9 Cadillac SRX ⌀66.9

Frequently asked questions

What is the PCD of a Volkswagen Transporter T7?

A Volkswagen Transporter T7 (from 2025) has a PCD of 6x120: 6 studs or bolts spaced around a circle 120 mm in diameter.

Does a Volkswagen Transporter T7 need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Transporter T7 is 74.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Transporter T7?

The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Transporter T7?

The specified tightening torque is 180 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Volkswagen models

Tayron 5x112 Passat B9 5x112 ID.7 5x112 ID.Buzz axe arrière 5x112 ID.Buzz axe avant 5x112 ID.5 axe avant 5x112 ID.5 axe arrière 5x112 ID.6 X axe arrière 5x112 Taigo 5x100 ID.6 Crozz axe arrière 5x112 ID.6 X axe avant 5x112 ID.6 Crozz axe avant 5x112 All Volkswagen →

Does a value look wrong, or is a version missing? Let us know, we check every report.