Volkswagen XL1 PCD

from 2015

VERIFIED

Centre bore57.1 mm

Offset (ET)ET16

Fixing typeEcrous - 12x1.50

Original tyres115/80R16

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen XL1

A Volkswagen XL1 (from 2015) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET16. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 115/80R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen XL1 without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Volkswagen Up 2011–2023 Volkswagen Lupo GTI 2002–2005 Volkswagen Lupo 1998–2005 Volkswagen Vento 1992–1998 Volkswagen Golf 3 1991–1997 Volkswagen Corrado 1988–1996 Volkswagen Fox 1987–1993 Volkswagen Golf 2 1983–1992 Volkswagen Passat 4 trou 1983–1996 Volkswagen Caddy 1982–1992 Volkswagen Scirocco II 1981–1993 Volkswagen Jetta 1979–1984 Volkswagen Polo 1 1975–1981 Volkswagen Golf 1 1974–1983

Will wheels from another vehicle fit your XL1?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Volkswagen XL1?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Volkswagen Jetta 1979–1984 Wheels from Seat Toledo 1991–1998

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Volkswagen XL1?

A Volkswagen XL1 (from 2015) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Volkswagen XL1 need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen XL1 is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen XL1?

The recorded original offset is ET16. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Volkswagen XL1?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Volkswagen Cross Up, Volkswagen e-Up, Volkswagen Up, Volkswagen Lupo GTI. Offset, width and rim diameter still need checking for each vehicle.

Other Volkswagen models

Transporter T7 6x120 Tayron 5x112 Passat B9 5x112 ID.7 5x112 ID.Buzz axe arrière 5x112 ID.Buzz axe avant 5x112 ID.5 axe avant 5x112 ID.5 axe arrière 5x112 ID.6 X axe arrière 5x112 Taigo 5x100 ID.6 Crozz axe arrière 5x112 ID.6 Crozz axe avant 5x112 All Volkswagen →

Does a value look wrong, or is a version missing? Let us know, we check every report.