FRENES

Volkswagen ID.6 Crozz axe avant PCD

from 2021
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Offset (ET)ET45
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres235/55R19
Hub centric rings 57.1 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen ID.6 Crozz axe avant

A Volkswagen ID.6 Crozz axe avant (from 2021) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/55R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen ID.6 Crozz axe avant without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Passat B9 from 2024 Volkswagen Tayron from 2024 Volkswagen ID.7 from 2023 Volkswagen ID.5 axe arrière from 2022 Volkswagen ID.5 axe avant from 2022 Volkswagen ID.Buzz axe arrière from 2022 Volkswagen ID.Buzz axe avant from 2022 Volkswagen ID.6 Crozz axe arrière from 2021 Volkswagen ID.6 X axe arrière from 2021 Volkswagen ID.6 X axe avant from 2021 Volkswagen Golf 8 GTI from 2020 Volkswagen Golf 8 R from 2020 Volkswagen ID.3 from 2020 Volkswagen ID.4 from 2020 Volkswagen Golf 8 from 2019 Volkswagen Arteon from 2017

Will wheels from another vehicle fit your ID.6 Crozz axe avant?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen ID.6 Crozz axe avant?

A Volkswagen ID.6 Crozz axe avant (from 2021) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Volkswagen ID.6 Crozz axe avant need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen ID.6 Crozz axe avant is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen ID.6 Crozz axe avant?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen ID.6 Crozz axe avant?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen ID.6 Crozz axe avant?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Volkswagen Passat B9, Volkswagen Tayron, Volkswagen ID.7, Volkswagen ID.5 axe arrière. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.