FRENES

Volkswagen Touareg VR5 TDI PCD

2002–2010
VERIFIED
⌀65.1
PCD5x120
Centre bore65.1 mm
Offset (ET)ET54
Fixing typeM14x1.50
Tightening torque180 Nm
Original tyres235/65R17
Hub centric rings 65.1 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Touareg VR5 TDI

A Volkswagen Touareg VR5 TDI (2002–2010) uses a 5x120 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120 required. See all vehicles with 5x120.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET54. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 180 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Touareg VR5 TDI without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Multivan T7 2021–2024 Volkswagen e-Crafter from 2018 Volkswagen Grand California from 2018 Volkswagen Crafter from 2017 Volkswagen Multivan T6 2015–2023 Volkswagen Transporter T6 2015–2024 Volkswagen Amarok from 2010 Volkswagen Transporter T5 2003–2015 Volkswagen Multivan T5 2002–2015 MAN eTGE from 2018 MAN TGE from 2017 Pontiac G8 2008–2009

Will wheels from another vehicle fit your Touareg VR5 TDI?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen Touareg VR5 TDI?

A Volkswagen Touareg VR5 TDI (2002–2010) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Volkswagen Touareg VR5 TDI need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Touareg VR5 TDI is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Touareg VR5 TDI?

The recorded original offset is ET54. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Touareg VR5 TDI?

The specified tightening torque is 180 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen Touareg VR5 TDI?

With the same PCD (5x120) and the same centre bore (65.1 mm), these include: Volkswagen Multivan T7, Volkswagen e-Crafter, Volkswagen Grand California, Volkswagen Crafter. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.