FRENES

Volkswagen Touareg III PCD

from 2018
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET25 to ET33
Fixing typeM14x1.5
Tightening torque180 Nm
Original tyres235/65R18, 255/55R18, 255/55R19, 285/45R20
Passage au 5x112 (le Touareg II était en 5x130)
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Touareg III

A Volkswagen Touareg III (from 2018) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET25 to ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 180 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R18, 255/55R18, 255/55R19, 285/45R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.6 mm 8Jx18 ET25 235/65R18
Version 2 5x112 66.6 mm 8Jx18 ET28 255/55R18
Version 3 5x112 66.6 mm 8Jx19 ET28 255/55R19
Version 4 5x112 66.6 mm 8.5Jx19 ET28 255/55R19
Version 5 5x112 66.6 mm 9Jx20 ET33 285/45R20

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Touareg III without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Touareg 2002–2010 Volkswagen Transporter T3 1979–1990 Volkswagen Transporter T2 1967–1979 BMW 2 Serie Gran Coupe F74 from 2025 BMW 1 Serie F70 from 2024 BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW X3 G45 from 2024 Mercedes AMG GT C192 from 2024 Mini Aceman J05 from 2024 Mini Cooper F66 from 2024 Mini Countryman U25 from 2024 BMW I5 from 2023 BMW M2 G87 from 2023 BMW XM G09 axe arrière from 2023 BMW XM G09 axe avant from 2023

Will wheels from another vehicle fit your Touareg III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen Touareg III?

A Volkswagen Touareg III (from 2018) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Volkswagen Touareg III need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Touareg III is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Touareg III?

The recorded original offset is ET25 to ET33 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Touareg III?

The specified tightening torque is 180 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen Touareg III?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Volkswagen Touareg, Volkswagen Transporter T3, Volkswagen Transporter T2, BMW 2 Serie Gran Coupe F74. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.