Volkswagen Transporter T3 PCD

1979–1990

VERIFIED

Centre bore66.6 mm

Offset (ET)ET25

Fixing typeM14x1.50

Hub centric rings 66.6 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Transporter T3

A Volkswagen Transporter T3 (1979–1990) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x112 required. See all vehicles with 5x112.
Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Transporter T3 without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Touareg 2002–2010 Volkswagen Transporter T2 1967–1979 BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW I5 from 2023 BMW XM G09 axe arrière from 2023 BMW XM G09 axe avant from 2023 Mercedes E-Classe W214 from 2023 XPeng G6 from 2023 Alpina B4 from 2022 BMW 7 Serie G70 from 2022 BMW i7 from 2022 BMW iX1 U11 from 2022 Mercedes EQE from 2022 BMW 2 Serie F44 from 2021 BMW i4 from 2021

Will wheels from another vehicle fit your Transporter T3?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x112 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.6 mm, and will not fit if it is smaller.

Volkswagen Passat B9 ⌀57.1 Volkswagen Tayron ⌀57.1 Volkswagen ID.7 ⌀57.1 Volkswagen ID.5 axe arrière ⌀57.1 Volkswagen ID.5 axe avant ⌀57.1 Volkswagen ID.Buzz axe arrière ⌀57.1 Volkswagen ID.Buzz axe avant ⌀57.1 Volkswagen ID.6 Crozz axe arrière ⌀57.1

Frequently asked questions

What is the PCD of a Volkswagen Transporter T3?

A Volkswagen Transporter T3 (1979–1990) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Volkswagen Transporter T3 need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Transporter T3 is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Transporter T3?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Volkswagen Transporter T3?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Volkswagen Touareg, Volkswagen Transporter T2, BMW iX2 U10, BMW X2 U10. Offset, width and rim diameter still need checking for each vehicle.

Other Volkswagen models

Transporter T7 6x120 Tayron 5x112 Passat B9 5x112 ID.7 5x112 ID.Buzz axe arrière 5x112 ID.Buzz axe avant 5x112 ID.5 axe avant 5x112 ID.5 axe arrière 5x112 ID.6 X axe arrière 5x112 Taigo 5x100 ID.6 Crozz axe arrière 5x112 ID.6 Crozz axe avant 5x112 All Volkswagen →

Does a value look wrong, or is a version missing? Let us know, we check every report.