A Zeekr 007 (from 2023) uses a 5x108 PCD and a centre bore of 63.4 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
Offset: the original is ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Zeekr 007 without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 63.4 mm, and will not fit if it is smaller.
A Zeekr 007 (from 2023) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.
Does a Zeekr 007 need a hub centric ring?
The centre bore (hub diameter) of a Zeekr 007 is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Zeekr 007?
The recorded original offset is ET49. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Zeekr 007?
The specified tightening torque is 160 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Zeekr 007?
With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Zeekr 9X, Zeekr 7X, Zeekr X, Zeekr 009. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more