FRENES

DS DS 4 II PCD

from 2021
VERIFIED
⌀65.1
PCD5x108
Centre bore65.1 mm
Offset (ET)ET41 to ET50
Fixing typeM12x1.25
Original tyres215/65R17, 225/55R18, 205/55R19, 245/40R20
Plateforme EMP2, inclut E-Tense.
Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a DS DS 4 II

A DS DS 4 II (from 2021) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET41 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R17, 225/55R18, 205/55R19, 245/40R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the DS DS

Previous generation: DS DS 9 (2020–2026) — same 5x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: DS DS 7 (from 2023) — same 5x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

DS 6 2014–2019 · 4x108 DS 3 2015–2019 · 4x108 DS 4 2015–2019 · 5x108 DS 5 2015–2018 · 4x108 DS 7 Crossback 2017–2023 · 5x108 DS 3 Crossback 2018–2021 · 4x108 DS 9 2020–2026 · 5x108 DS 4 II from 2021 DS 7 from 2023 · 5x108

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 65.1 mm 7Jx17 ET42 215/65R17
Version 2 5x108 65.1 mm 7.5Jx18 ET49 225/55R18
Version 3 5x108 65.1 mm 7Jx19 ET41 205/55R19
Version 4 5x108 65.1 mm 8Jx20 ET50 245/40R20

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a DS DS 4 II without rings. Offset, width, diameter and caliper clearance still need checking.

DS DS 7 from 2023 DS DS 9 2020–2026 DS DS 7 Crossback 2017–2023 DS DS 3 2015–2019 DS DS 4 2015–2019 Peugeot 408 from 2022 Citroen C5 X from 2021 Opel Astra L from 2021 Peugeot 308 III from 2021 Toyota ProAce City from 2020 Opel Zafira Life from 2019 Citroen Berlingo III from 2018 Opel Combo E from 2018 Peugeot 508 II from 2018 Peugeot Rifter from 2018 Citroen C5 Aircross from 2017

Will wheels from another vehicle fit your DS 4 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a DS DS 4 II?

A DS DS 4 II (from 2021) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a DS DS 4 II need a hub centric ring?

The centre bore (hub diameter) of a DS DS 4 II is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a DS DS 4 II?

The recorded original offset is ET41 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a DS DS 4 II?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: DS DS 7, DS DS 9, DS DS 7 Crossback, DS DS 3. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.