Audi A4 Allroad B8 PCD

2009–2015

VERIFIED

Centre bore66.5 mm

Offset (ET)ET28

Fixing typeM14x1.50

Tightening torque120 Nm

Original tyres225/55R17

Hub centric rings 66.5 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi A4 Allroad B8

A Audi A4 Allroad B8 (2009–2015) uses a 5x112 PCD and a centre bore of 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x112 required. See all vehicles with 5x112.
Centre bore: the wheel must have a centre bore of 66.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.5 mm.
Offset: the original is ET28. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.5 mm centre bore: wheels from these vehicles bolt on and centre on a Audi A4 Allroad B8 without rings. Offset, width, diameter and caliper clearance still need checking.

Audi A4 from 2019 Audi RS Q8 from 2019 Audi RS6 C8 from 2019 Audi S6 C8 from 2019 Audi SQ8 from 2019 Audi A6 C8 from 2018 Audi A7 from 2018 Audi A8 D5 from 2018 Audi Q8 from 2018 Audi RS4 B9 from 2017 Audi RS5 F5 from 2017 Audi SQ7 from 2016 Audi A4 B9 2015–2019 Audi RS6 C7 2013–2018 Audi RS7 Sportback 2013–2018 Audi Allroad 2012–2016

Will wheels from another vehicle fit your A4 Allroad B8?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Audi A4 Allroad B8?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Audi A6 C8 from 2018 Wheels from Audi A8 D5 from 2018 Wheels from Audi A5 Sportback 2009–2016 Wheels from Audi Q5 2008–2016

Same PCD, different centre bore

These vehicles also use 5x112 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.5 mm, and will not fit if it is smaller.

Audi Q4 E-TRON ⌀57.1 Audi A3 8Y ⌀57.1 Audi RS Q3 ⌀57.1 Audi SQ2 ⌀57.1 Audi E-Tron ⌀66.6 Audi Q2 ⌀57.1 Audi TTS 8S ⌀57.1 Audi TT ⌀57.1

Frequently asked questions

What is the PCD of a Audi A4 Allroad B8?

A Audi A4 Allroad B8 (2009–2015) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi A4 Allroad B8 need a hub centric ring?

The centre bore (hub diameter) of a Audi A4 Allroad B8 is 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi A4 Allroad B8?

The recorded original offset is ET28. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi A4 Allroad B8?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi A4 Allroad B8?

With the same PCD (5x112) and the same centre bore (66.5 mm), these include: Audi A4, Audi RS Q8, Audi RS6 C8, Audi S6 C8. Offset, width and rim diameter still need checking for each vehicle.

Other Audi models

Q4 E-TRON 5x112 A3 8Y 5x112 RS Q8 5x112 A1 Citycarver 5x100 RS Q3 5x112 SQ8 5x112 RS6 C8 5x112 A4 5x112 S6 C8 5x112 SQ2 5x112 A8 D5 5x112 Q8 5x112 All Audi →

Does a value look wrong, or is a version missing? Let us know, we check every report.