FRENES

Audi A5 F5 PCD

2016–2024
VERIFIED
⌀66.5
PCD5x112
Centre bore66.5 mm
Offset (ET)ET29
Fixing typeM14x1.5
Tightening torque120 Nm
Original tyres225/50R17, 245/40R18
Restylage 2020 identique
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi A5 F5

A Audi A5 F5 (2016–2024) uses a 5x112 PCD and a centre bore of 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.5 mm.
  • Offset: the original is ET29. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/50R17, 245/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Audi A5

Previous generation: Audi A5 (2007–2016) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

A5 2007–2016 · 5x112 A5 F5 2016–2024

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.5 mm 7.5Jx17 ET29 225/50R17
Version 2 5x112 66.5 mm 8.5Jx18 ET29 245/40R18

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.5 mm centre bore: wheels from these vehicles bolt on and centre on a Audi A5 F5 without rings. Offset, width, diameter and caliper clearance still need checking.

Audi Q8 e-tron from 2023 Audi A4 from 2019 Audi RS Q8 from 2019 Audi RS6 C8 from 2019 Audi S6 C8 from 2019 Audi SQ8 from 2019 Audi A6 C8 from 2018 Audi A7 from 2018 Audi A8 D5 from 2018 Audi Q8 from 2018 Audi Q5 FY 2017–2024 Audi RS4 B9 from 2017 Audi RS5 F5 from 2017 Audi SQ7 from 2016 Audi A4 B9 2015–2019 Audi Q7 4M from 2015

Will wheels from another vehicle fit your A5 F5?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Audi A5 F5?

A Audi A5 F5 (2016–2024) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi A5 F5 need a hub centric ring?

The centre bore (hub diameter) of a Audi A5 F5 is 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi A5 F5?

The recorded original offset is ET29 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi A5 F5?

The specified tightening torque is 120 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi A5 F5?

With the same PCD (5x112) and the same centre bore (66.5 mm), these include: Audi Q8 e-tron, Audi A4, Audi RS Q8, Audi RS6 C8. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.