FRENES

Audi Q7 4M PCD

from 2015
VERIFIED
⌀66.5
PCD5x112
Centre bore66.5 mm
Offset (ET)ET20 to ET28
Fixing typeM14x1.5
Tightening torque160 Nm
Original tyres235/65R18, 255/60R18, 255/55R19
Restylage 2019 identique
Performance parts for your Audi Q7 4M Brakes, suspension, intake, exhaust… at STR Performance, French tuning shop. See the parts → (partner link)
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi Q7 4M

A Audi Q7 4M (from 2015) uses a 5x112 PCD and a centre bore of 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.5 mm.
  • Offset: the original is ET20 to ET28. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R18, 255/60R18, 255/55R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Audi Q7

Previous generation: Audi Q7 (2005–2015) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Q7 2005–2015 · 5x112 Q7 4M from 2015

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.5 mm 8Jx18 ET20 235/65R18
Version 2 5x112 66.5 mm 8Jx18 ET25 255/60R18
Version 3 5x112 66.5 mm 8.5Jx19 ET28 255/55R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.5 mm centre bore: wheels from these vehicles bolt on and centre on a Audi Q7 4M without rings. Offset, width, diameter and caliper clearance still need checking.

Audi Q8 e-tron from 2023 Audi A4 from 2019 Audi RS Q8 from 2019 Audi RS6 C8 from 2019 Audi S6 C8 from 2019 Audi SQ8 from 2019 Audi A6 C8 from 2018 Audi A7 from 2018 Audi A8 D5 from 2018 Audi Q8 from 2018 Audi Q5 FY 2017–2024 Audi RS4 B9 from 2017 Audi RS5 F5 from 2017 Audi A5 F5 2016–2024 Audi SQ7 from 2016 Audi A4 B9 2015–2019

Will wheels from another vehicle fit your Q7 4M?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Audi Q7 4M?

A Audi Q7 4M (from 2015) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi Q7 4M need a hub centric ring?

The centre bore (hub diameter) of a Audi Q7 4M is 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi Q7 4M?

The recorded original offset is ET20 to ET28 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi Q7 4M?

The specified tightening torque is 160 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi Q7 4M?

With the same PCD (5x112) and the same centre bore (66.5 mm), these include: Audi Q8 e-tron, Audi A4, Audi RS Q8, Audi RS6 C8. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.