FRENES

Audi RS7 Sportback PCD

2013–2018
VERIFIED
⌀66.5
PCD5x112
Centre bore66.5 mm
Offset (ET)ET19 to ET35
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres275/35R20, 245/40R21
Hub centric rings 66.5 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi RS7 Sportback

A Audi RS7 Sportback (2013–2018) uses a 5x112 PCD and a centre bore of 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.5 mm.
  • Offset: the original is ET19 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 275/35R20, 245/40R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.5 mm 9Jx20 ET35 275/35R20
Version 2 5x112 66.5 mm — ET19 245/40R21

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.5 mm centre bore: wheels from these vehicles bolt on and centre on a Audi RS7 Sportback without rings. Offset, width, diameter and caliper clearance still need checking.

Audi A4 from 2019 Audi RS Q8 from 2019 Audi RS6 C8 from 2019 Audi S6 C8 from 2019 Audi SQ8 from 2019 Audi A6 C8 from 2018 Audi A7 from 2018 Audi A8 D5 from 2018 Audi Q8 from 2018 Audi RS4 B9 from 2017 Audi RS5 F5 from 2017 Audi SQ7 from 2016 Audi A4 B9 2015–2019 Audi RS6 C7 2013–2018 Audi Allroad 2012–2016 Audi RS4 B8 2012–2016

Will wheels from another vehicle fit your RS7 Sportback?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Audi RS7 Sportback?

A Audi RS7 Sportback (2013–2018) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi RS7 Sportback need a hub centric ring?

The centre bore (hub diameter) of a Audi RS7 Sportback is 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi RS7 Sportback?

The recorded original offset is ET19 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi RS7 Sportback?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi RS7 Sportback?

With the same PCD (5x112) and the same centre bore (66.5 mm), these include: Audi A4, Audi RS Q8, Audi RS6 C8, Audi S6 C8. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.