FRENES

Audi S7 PCD

2011–2018
VERIFIED
⌀66.5
PCD5x112
Centre bore66.5 mm
Offset (ET)ET30 to ET32
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres235/45R19, 245/45R19
Hub centric rings 66.5 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi S7

A Audi S7 (2011–2018) uses a 5x112 PCD and a centre bore of 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.5 mm.
  • Offset: the original is ET30 to ET32. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/45R19, 245/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.5 mm — ET32 235/45R19
Version 2 5x112 66.5 mm — ET30 245/45R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.5 mm centre bore: wheels from these vehicles bolt on and centre on a Audi S7 without rings. Offset, width, diameter and caliper clearance still need checking.

Audi A4 from 2019 Audi RS Q8 from 2019 Audi RS6 C8 from 2019 Audi S6 C8 from 2019 Audi SQ8 from 2019 Audi A6 C8 from 2018 Audi A7 from 2018 Audi A8 D5 from 2018 Audi Q8 from 2018 Audi RS4 B9 from 2017 Audi RS5 F5 from 2017 Audi SQ7 from 2016 Audi A4 B9 2015–2019 Audi RS6 C7 2013–2018 Audi RS7 Sportback 2013–2018 Audi Allroad 2012–2016

Will wheels from another vehicle fit your S7?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Audi S7?

A Audi S7 (2011–2018) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi S7 need a hub centric ring?

The centre bore (hub diameter) of a Audi S7 is 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi S7?

The recorded original offset is ET30 to ET32 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi S7?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi S7?

With the same PCD (5x112) and the same centre bore (66.5 mm), these include: Audi A4, Audi RS Q8, Audi RS6 C8, Audi S6 C8. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.