FRENES

DS DS 5 PCD

2015–2018
VERIFIED
⌀65.1
PCD4x108
Centre bore65.1 mm
Offset (ET)ET26
Fixing typeM12x1.25
Original tyres215/60R16
Hub centric rings 65.1 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a DS DS 5

A DS DS 5 (2015–2018) uses a 4x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET26. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a DS DS 5 without rings. Offset, width, diameter and caliper clearance still need checking.

DS DS 3 Crossback 2018–2021 DS DS 3 2015–2019 DS DS 6 2014–2019 Alfa Romeo Junior from 2024 Fiat 600 from 2023 Fiat 600E from 2023 Fiat Topolino from 2023 Jeep Avenger from 2023 Peugeot e-208 from 2023 Opel Rocks-E from 2022 Citroen Ami from 2020 Citroen C4 III from 2020 Opel Corsa F from 2019 Peugeot 2008 II from 2019 Peugeot 208 II from 2019 Citroen C3 Aircross from 2017

Will wheels from another vehicle fit your DS 5?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a DS DS 5?

A DS DS 5 (2015–2018) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a DS DS 5 need a hub centric ring?

The centre bore (hub diameter) of a DS DS 5 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a DS DS 5?

The recorded original offset is ET26. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a DS DS 5?

With the same PCD (4x108) and the same centre bore (65.1 mm), these include: DS DS 3 Crossback, DS DS 3, DS DS 6, Alfa Romeo Junior. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.