FRENES

DS DS 4 PCD

2015–2019
VERIFIED
⌀65.1
PCD5x108
Centre bore65.1 mm
Offset (ET)ET29 to ET42
Fixing typeM12x1.25
Tightening torque100 Nm
Original tyres215/60R16, 215/65R17
Hub centric rings 65.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a DS DS 4

A DS DS 4 (2015–2019) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET29 to ET42. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R16, 215/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 65.1 mm 7Jx16 ET29 215/60R16
Version 2 5x108 65.1 mm — ET42 215/65R17

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a DS DS 4 without rings. Offset, width, diameter and caliper clearance still need checking.

DS DS 7 from 2023 DS DS 9 2020–2026 DS DS 7 Crossback 2017–2023 DS DS 3 2015–2019 Peugeot 408 from 2022 Opel Zafira Life from 2019 Citroen Berlingo III from 2018 Peugeot Rifter from 2018 Citroen C5 Aircross from 2017 Opel Grandland X from 2017 Peugeot 5008 II 2017–2024 Citroen SpaceTourer 2016–2024 Peugeot 3008 II 2016–2023 Peugeot Traveller from 2016 Peugeot 308 SW 2014–2022 Peugeot RCZ-R 2014–2016

Will wheels from another vehicle fit your DS 4?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a DS DS 4?

A DS DS 4 (2015–2019) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a DS DS 4 need a hub centric ring?

The centre bore (hub diameter) of a DS DS 4 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a DS DS 4?

The recorded original offset is ET29 to ET42 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a DS DS 4?

The specified tightening torque is 100 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a DS DS 4?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: DS DS 7, DS DS 9, DS DS 7 Crossback, DS DS 3. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.