FRENES

Honda Civic Type R FN2 PCD

2007–2011
VERIFIED
⌀64.1
PCD5x114.3
Centre bore64.1 mm
Offset (ET)ET55
Fixing typeM12x1.5
Tightening torque108 Nm
Original tyres225/40R18
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Civic Type R FN2

A Honda Civic Type R FN2 (2007–2011) uses a 5x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
  • Offset: the original is ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Honda Civic Type R

Previous generation: Honda Civic Type R (2001–2006) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Honda Civic Type R FK2 (2015–2017) — the bolt pattern changes (5x120 instead of 5x114.3): the wheels are not interchangeable.

Civic Type R 2001–2006 · 5x114.3 Civic Type R FN2 2007–2011 Civic Type R FK2 2015–2017 · 5x120 Civic Type R FK8 2017–2022 · 5x120 Civic Type R FL5 from 2022 · 5x120

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Civic Type R FN2 without rings. Offset, width, diameter and caliper clearance still need checking.

Honda e:Ny1 from 2023 Honda Civic FL from 2022 Honda e:Np1 from 2022 Honda e:Ns1 from 2022 Honda ZR-V from 2022 Honda HR-V RV from 2021 Honda e from 2020 Honda CR-V RW 2018–2023 Honda Civic FK7 2017–2022 Honda HR-V RU 2015–2021 Honda XR-V from 2014 Honda Civic FK 2012–2017 Honda CR-V RM 2012–2018 Honda CR-Z 2010–2017 Honda Accord CU 2008–2015 Honda Civic FK/FN 2006–2011

Will wheels from another vehicle fit your Civic Type R FN2?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda Civic Type R FN2?

A Honda Civic Type R FN2 (2007–2011) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Honda Civic Type R FN2 need a hub centric ring?

The centre bore (hub diameter) of a Honda Civic Type R FN2 is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Civic Type R FN2?

The recorded original offset is ET55. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda Civic Type R FN2?

The specified tightening torque is 108 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda Civic Type R FN2?

With the same PCD (5x114.3) and the same centre bore (64.1 mm), these include: Honda e:Ny1, Honda Civic FL, Honda e:Np1, Honda e:Ns1. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.