FRENES

Honda CR-V RM PCD

2012–2018
VERIFIED
⌀64.1
PCD5x114.3
Centre bore64.1 mm
Offset (ET)ET45 to ET50
Fixing typeM12x1.5
Tightening torque108 Nm
Original tyres225/65R17, 225/60R18
Jante 18 pouces ET45 sur la phase 2 (2015-2018)
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda CR-V RM

A Honda CR-V RM (2012–2018) uses a 5x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
  • Offset: the original is ET45 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/65R17, 225/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 64.1 mm 6.5Jx17 ET50 225/65R17
Version 2 5x114.3 64.1 mm 7Jx18 ET50 225/60R18
Version 3 5x114.3 64.1 mm 7Jx18 ET45 225/60R18

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda CR-V RM without rings. Offset, width, diameter and caliper clearance still need checking.

Honda e:Ny1 from 2023 Honda Civic FL from 2022 Honda e:Np1 from 2022 Honda e:Ns1 from 2022 Honda ZR-V from 2022 Honda HR-V RV from 2021 Honda e from 2020 Honda CR-V RW 2018–2023 Honda Civic FK7 2017–2022 Honda HR-V RU 2015–2021 Honda XR-V from 2014 Honda Civic FK 2012–2017 Honda CR-Z 2010–2017 Honda Accord CU 2008–2015 Honda Civic Type R FN2 2007–2011 Honda Civic FK/FN 2006–2011

Will wheels from another vehicle fit your CR-V RM?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda CR-V RM?

A Honda CR-V RM (2012–2018) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Honda CR-V RM need a hub centric ring?

The centre bore (hub diameter) of a Honda CR-V RM is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda CR-V RM?

The recorded original offset is ET45 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda CR-V RM?

The specified tightening torque is 108 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda CR-V RM?

With the same PCD (5x114.3) and the same centre bore (64.1 mm), these include: Honda e:Ny1, Honda Civic FL, Honda e:Np1, Honda e:Ns1. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.