Honda Legend PCD

1985–1990

VERIFIED

Centre bore64.1 mm

Offset (ET)ET50 to ET55

Fixing typeEcrous - 12x1.50

Original tyres235/50R17

⚠ This model comes with 4x114.3 or 5x114.3 or 5x120 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 64.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Legend

A Honda Legend (1985–1990) uses a 4x114.3 or 5x114.3 or 5x120 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 or 5x114.3 or 5x120 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET50 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x114.3	64.1 mm	—	ET50	—
Version 2	5x114.3	64.1 mm	—	ET55	—
Version 3	5x120	64.1 mm	—	ET55	235/50R17

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Legend without rings. Offset, width, diameter and caliper clearance still need checking.

Honda Prelude 4 trou 1992–2000 Honda Accord 1982–1990 Rover 600-Serie 1993–1999 Rover 800-Serie 1986–1991 Acura Legend 1985–1990

Will wheels from another vehicle fit your Legend?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Honda Legend?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Honda Pilot 2003–2008

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1 Chevrolet Evanda ⌀56.6

Frequently asked questions

What is the PCD of a Honda Legend?

A Honda Legend (1985–1990) can have a 4x114.3 or 5x114.3 or 5x120 PCD depending on the version: check on an original wheel.

Does a Honda Legend need a hub centric ring?

The centre bore (hub diameter) of a Honda Legend is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Legend?

The recorded original offset is ET50 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Honda Legend?

With the same PCD (4x114.3) and the same centre bore (64.1 mm), these include: Honda Prelude 4 trou, Honda Accord, Rover 600-Serie, Rover 800-Serie. Offset, width and rim diameter still need checking for each vehicle.

Other Honda models

e:Ny1 5x114.3 ZR-V 5x114.3 e:Np1 5x114.3 e:Ns1 5x114.3 e 5x114.3 WR-V 4x100 NSX axe arrière 5x120 NSX axe avant 5x120 XR-V 5x114.3 CR-Z 5x114.3 Insight 4x100 Fit 4x100 All Honda →

Does a value look wrong, or is a version missing? Let us know, we check every report.