Hummer H2 PCD

2002–2010

VERIFIED

Centre bore117 mm

Offset (ET)ET33

Fixing typeEcrous - 14x1.50

Hub centric rings 117 mm → Wheel spacers 8x165.1(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hummer H2

A Hummer H2 (2002–2010) uses a 8x165.1 PCD and a centre bore of 117 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 8x165.1 required. See all vehicles with 8x165.1.
Centre bore: the wheel must have a centre bore of 117 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 117 mm.
Offset: the original is ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 8x165.1 PCD and same 117 mm centre bore: wheels from these vehicles bolt on and centre on a Hummer H2 without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Express from 1996 GMC Savanna from 1996 Dodge Pickup 1971–1993

Will wheels from another vehicle fit your H2?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 8x165.1 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 117 mm, and will not fit if it is smaller.

RAM RAM 2500 Pickup ⌀121.3 RAM RAM 3500 Pickup ⌀121.3 Ford E-150 Econoline ⌀87 Ford E-250 Econoline ⌀123.9 Ford E-350 ⌀123.9

Frequently asked questions

What is the PCD of a Hummer H2?

A Hummer H2 (2002–2010) has a PCD of 8x165.1: 8 studs or bolts spaced around a circle 165.1 mm in diameter.

Does a Hummer H2 need a hub centric ring?

The centre bore (hub diameter) of a Hummer H2 is 117 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hummer H2?

The recorded original offset is ET33. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hummer H2?

With the same PCD (8x165.1) and the same centre bore (117 mm), these include: Chevrolet Express, GMC Savanna, Dodge Pickup. Offset, width and rim diameter still need checking for each vehicle.

Other Hummer models

H3 6x139.7 All Hummer →

Does a value look wrong, or is a version missing? Let us know, we check every report.