FRENES

RAM RAM 2500 Pickup PCD

2011–2018
VERIFIED
⌀121.3
PCD8x165.1
Centre bore121.3 mm
Offset (ET)ET42 to ET57
Fixing typeEcrous - 14x1.50
Tightening torque175 Nm
Original tyres265/70R17, 245/70R17
Hub centric rings 121.3 mm → Wheel spacers 8x165.1(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a RAM RAM 2500 Pickup

A RAM RAM 2500 Pickup (2011–2018) uses a 8x165.1 PCD and a centre bore of 121.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 8x165.1 required. See all vehicles with 8x165.1.
  • Centre bore: the wheel must have a centre bore of 121.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 121.3 mm.
  • Offset: the original is ET42 to ET57. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50, tightened to 175 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 265/70R17, 245/70R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 8x165.1 121.3 mm — ET42 265/70R17
Version 2 8x165.1 121.3 mm — ET57 245/70R17

Vehicles with the same PCD and centre bore

Same 8x165.1 PCD and same 121.3 mm centre bore: wheels from these vehicles bolt on and centre on a RAM RAM 2500 Pickup without rings. Offset, width, diameter and caliper clearance still need checking.

RAM RAM 3500 Pickup 2011–2018

Will wheels from another vehicle fit your RAM 2500 Pickup?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a RAM RAM 2500 Pickup?

A RAM RAM 2500 Pickup (2011–2018) has a PCD of 8x165.1: 8 studs or bolts spaced around a circle 165.1 mm in diameter.

Does a RAM RAM 2500 Pickup need a hub centric ring?

The centre bore (hub diameter) of a RAM RAM 2500 Pickup is 121.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a RAM RAM 2500 Pickup?

The recorded original offset is ET42 to ET57 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a RAM RAM 2500 Pickup?

The specified tightening torque is 175 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a RAM RAM 2500 Pickup?

With the same PCD (8x165.1) and the same centre bore (121.3 mm), these include: RAM RAM 3500 Pickup. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.