Chevrolet Express PCD

from 1996
VERIFIED
⌀117
Centre bore117 mm
Offset (ET)ET20
Fixing typeEcrous - 14x1.50
Tightening torque190 Nm

Fitting wheels on a Chevrolet Express

A Chevrolet Express (from 1996) uses a 8x165.1 PCD and a centre bore of 117 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 8x165.1 required. See all vehicles with 8x165.1.
  • Centre bore: the wheel must have a centre bore of 117 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 117 mm.
  • Offset: the original is ET20. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50, tightened to 190 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your Express?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chevrolet Express?

A Chevrolet Express (from 1996) has a PCD of 8x165.1: 8 studs or bolts spaced around a circle 165.1 mm in diameter.

Does a Chevrolet Express need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Express is 117 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Express?

The recorded original offset is ET20. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Express?

The specified tightening torque is 190 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Express?

With the same PCD (8x165.1) and the same centre bore (117 mm), these include: Hummer H2, GMC Savanna, Dodge Pickup. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.