Ford E-350 PCD

1992–2007

VERIFIED

Centre bore123.9 mm

Offset (ET)ET0 to ET6.35

Fixing typeEcrous - 9/16 - 18 U

Tightening torque190 Nm

Original tyres225/75R16, 245/75R16

Hub centric rings 123.9 mm → Wheel spacers 8x165.1(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford E-350

A Ford E-350 (1992–2007) uses a 8x165.1 PCD and a centre bore of 123.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 8x165.1 required. See all vehicles with 8x165.1.
Centre bore: the wheel must have a centre bore of 123.9 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 123.9 mm.
Offset: the original is ET0 to ET6.35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 9/16 - 18 U, tightened to 190 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/75R16, 245/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	8x165.1	123.9 mm	7Jx16	ET0	225/75R16
Version 2	8x165.1	123.9 mm	7Jx16	ET6.35	225/75R16
Version 3	8x165.1	123.9 mm	7Jx16	ET6.35	245/75R16

Vehicles with the same PCD and centre bore

Same 8x165.1 PCD and same 123.9 mm centre bore: wheels from these vehicles bolt on and centre on a Ford E-350 without rings. Offset, width, diameter and caliper clearance still need checking.

Ford E-250 Econoline 1992–2007

Will wheels from another vehicle fit your E-350?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Ford E-350?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Ford E-250 Econoline 1992–2007

Same PCD, different centre bore

These vehicles also use 8x165.1 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 123.9 mm, and will not fit if it is smaller.

Ford E-150 Econoline ⌀87 RAM RAM 2500 Pickup ⌀121.3 RAM RAM 3500 Pickup ⌀121.3 Hummer H2 ⌀117 Chevrolet Express ⌀117 GMC Savanna ⌀117 Dodge Pickup ⌀117

Frequently asked questions

What is the PCD of a Ford E-350?

A Ford E-350 (1992–2007) has a PCD of 8x165.1: 8 studs or bolts spaced around a circle 165.1 mm in diameter.

Does a Ford E-350 need a hub centric ring?

The centre bore (hub diameter) of a Ford E-350 is 123.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford E-350?

The recorded original offset is ET0 to ET6.35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford E-350?

The specified tightening torque is 190 Nm for Ecrous - 9/16 - 18 U fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford E-350?

With the same PCD (8x165.1) and the same centre bore (123.9 mm), these include: Ford E-250 Econoline. Offset, width and rim diameter still need checking for each vehicle.

Other Ford models

Capri 5x112 Explorer EV 5x112 Transit Courier 5x108 Tourneo Courier 5x108 E-Transit 5x160 Mustang Mach-E 5x108 Puma (J2K) 5x108 Kuga III 5x108 Focus IV 5x108 Fiesta MK8 4x108 Tourneo 5x160 EcoSport 4x108 All Ford →

Does a value look wrong, or is a version missing? Let us know, we check every report.