FRENES

Ford E-150 Econoline PCD

1992–2007
VERIFIED
⌀87
PCD5x139.7 or 8x165.1
Centre bore87 mm
Offset (ET)ET14 to ET35
Fixing typeEcrous - 1/2 - 20 UN
Tightening torque135 Nm
Original tyres215/75R15, 225/75R16
⚠ This model comes with 5x139.7 or 8x165.1 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 87 mm → Wheel spacers 5x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford E-150 Econoline

A Ford E-150 Econoline (1992–2007) uses a 5x139.7 or 8x165.1 PCD and a centre bore of 87 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x139.7 or 8x165.1 required. See all vehicles with 5x139.7.
  • Centre bore: the wheel must have a centre bore of 87 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 87 mm.
  • Offset: the original is ET14 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 1/2 - 20 UN, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/75R15, 225/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x139.7 87 mm — ET14 215/75R15
Version 2 8x165.1 87 mm — ET35 225/75R16

Will wheels from another vehicle fit your E-150 Econoline?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford E-150 Econoline?

A Ford E-150 Econoline (1992–2007) can have a 5x139.7 or 8x165.1 PCD depending on the version: check on an original wheel.

Does a Ford E-150 Econoline need a hub centric ring?

The centre bore (hub diameter) of a Ford E-150 Econoline is 87 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford E-150 Econoline?

The recorded original offset is ET14 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford E-150 Econoline?

The specified tightening torque is 135 Nm for Ecrous - 1/2 - 20 UN fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Does a value look wrong, or is a version missing? Let us know, we check every report.