Jaguar X-Type PCD

2001–2006

VERIFIED

Centre bore63.5 or 63.4 mm

Offset (ET)ET52.5 to ET60

Fixing typeEcrous - 12x1.50

Tightening torque68-92 Nm

Original tyres205/55R16, 225/45R17

Hub centric rings 63.5 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Jaguar X-Type

A Jaguar X-Type (2001–2006) uses a 5x108 PCD and a centre bore of 63.5 or 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 63.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.5 mm.
Offset: the original is ET52.5 to ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 68-92 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/55R16, 225/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x108	63.5 mm	—	ET52.5	205/55R16
Version 2	5x108	63.4 mm	—	ET60	225/45R17

Will wheels from another vehicle fit your X-Type?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Jaguar X-Type?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Jaguar E-Pace from 2017 Wheels from Jaguar XE from 2015 Wheels from Jaguar XF Serie 2008–2015 Wheels from Jaguar S-Type R 2002–2008

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 63.5 mm, and will not fit if it is smaller.

Jaguar I-Pace ⌀63.4 Jaguar E-Pace ⌀63.4 Jaguar F-Pace ⌀63.4 Jaguar XE ⌀63.4 Jaguar XF ⌀63.4 Jaguar F-Type ⌀63.4 Jaguar XF Serie ⌀63.4 Jaguar XK Serie ⌀63.4

Frequently asked questions

What is the PCD of a Jaguar X-Type?

A Jaguar X-Type (2001–2006) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Jaguar X-Type need a hub centric ring?

The centre bore (hub diameter) of a Jaguar X-Type is 63.5 or 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Jaguar X-Type?

The recorded original offset is ET52.5 to ET60 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Jaguar X-Type?

The specified tightening torque is 68-92 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Jaguar models

I-Pace 5x108 E-Pace 5x108 F-Pace 5x108 XE 5x108 XF 5x108 F-Type 5x108 XF Serie 5x108 XK Serie 5x108 S-Type R 5x108 S-Type 5x108 XK 5x120.65 XJ 5x108 All Jaguar →

Does a value look wrong, or is a version missing? Let us know, we check every report.