Jaguar XK PCD

1996–2006

VERIFIED

Centre bore73.8 mm

Offset (ET)ET33

Fixing typeEcrous - 1/2 - 20 UN

Tightening torque88-102 Nm

Original tyres245/50R17

Hub centric rings 73.8 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Jaguar XK

A Jaguar XK (1996–2006) uses a 5x120.65 PCD and a centre bore of 73.8 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 73.8 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 73.8 mm.
Offset: the original is ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 1/2 - 20 UN, tightened to 88-102 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your XK?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 73.8 mm, and will not fit if it is smaller.

Jaguar XJ ⌀74 Chevrolet Corvette C7 ⌀70.3 Cadillac CTS-V ⌀67.1 Chevrolet Corvette C6 ⌀70.3 Cadillac XLR ⌀70.3 Cadillac CTS ⌀67.1 Chevrolet Jimny ⌀70.3 Chevrolet Corvette C5 ⌀70.3

Frequently asked questions

What is the PCD of a Jaguar XK?

A Jaguar XK (1996–2006) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Jaguar XK need a hub centric ring?

The centre bore (hub diameter) of a Jaguar XK is 73.8 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Jaguar XK?

The recorded original offset is ET33. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Jaguar XK?

The specified tightening torque is 88-102 Nm for Ecrous - 1/2 - 20 UN fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Jaguar models

I-Pace 5x108 E-Pace 5x108 F-Pace 5x108 XE 5x108 XF 5x108 F-Type 5x108 XF Serie 5x108 XK Serie 5x108 S-Type R 5x108 X-Type 5x108 S-Type 5x108 XJ 5x108 All Jaguar →

Does a value look wrong, or is a version missing? Let us know, we check every report.