FRENES

Jaguar S-Type PCD

1999–2006
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 or 63.5 mm
Offset (ET)ET50 to ET60
Fixing typeEcrous - 12x1.50
Tightening torque128 Nm
Original tyres225/55R16
Hub centric rings 63.4 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Jaguar S-Type

A Jaguar S-Type (1999–2006) uses a 5x108 PCD and a centre bore of 63.4 or 63.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET50 to ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 128 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm — ET60 225/55R16
Version 2 5x108 63.5 mm — ET50 225/55R16

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Jaguar S-Type without rings. Offset, width, diameter and caliper clearance still need checking.

Jaguar I-Pace from 2018 Jaguar E-Pace from 2017 Jaguar F-Pace from 2015 Jaguar XE from 2015 Jaguar XF from 2015 Jaguar F-Type 2012–2017 Jaguar XF Serie 2008–2015 Jaguar XK Serie 2006–2015 Jaguar S-Type R 2002–2008 Jaguar XJ 1968–1973 Zeekr 9X from 2025 Lynk&Co 02 from 2024 Polestar Polestar 4 from 2024 Volvo EC40 from 2024 Volvo EX40 axe arrière from 2024 Volvo EX40 axe avant from 2024

Will wheels from another vehicle fit your S-Type?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Jaguar S-Type?

A Jaguar S-Type (1999–2006) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Jaguar S-Type need a hub centric ring?

The centre bore (hub diameter) of a Jaguar S-Type is 63.4 or 63.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Jaguar S-Type?

The recorded original offset is ET50 to ET60 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Jaguar S-Type?

The specified tightening torque is 128 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Jaguar S-Type?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Jaguar I-Pace, Jaguar E-Pace, Jaguar F-Pace, Jaguar XE. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.