Jaguar XJ PCD

1968–1973

VERIFIED

Centre bore74 or 63.4 mm

Offset (ET)ET28 to ET49

Fixing typeEcrous - 1/2 - 20 UN

Tightening torque75 Nm

Original tyres205/70R15, 225/65R15, 225/55R16, 235/55R17

⚠ This model comes with 5x120.65 or 5x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 74 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Jaguar XJ

A Jaguar XJ (1968–1973) uses a 5x120.65 or 5x108 PCD and a centre bore of 74 or 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 or 5x108 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 74 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 74 mm.
Offset: the original is ET28 to ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 1/2 - 20 UN, tightened to 75 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/70R15, 225/65R15, 225/55R16, 235/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x120.65	74 mm	—	ET28	205/70R15
Version 2	5x120.65	74 mm	—	ET28	225/65R15
Version 3	5x120.65	74 mm	—	ET33	225/55R16
Version 4	5x108	63.4 mm	—	ET49	235/55R17
Version 5	5x108	63.4 mm	—	ET49	245/50R18

Will wheels from another vehicle fit your XJ?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Jaguar XJ?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Jaguar I-Pace from 2018 Wheels from Jaguar E-Pace from 2017 Wheels from Jaguar F-Pace from 2015 Wheels from Jaguar XE from 2015

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 74 mm, and will not fit if it is smaller.

Jaguar XK ⌀73.8 Chevrolet Corvette C7 ⌀70.3 Cadillac CTS-V ⌀67.1 Chevrolet Corvette C6 ⌀70.3 Cadillac XLR ⌀70.3 Cadillac CTS ⌀67.1 Chevrolet Jimny ⌀70.3 Chevrolet Corvette C5 ⌀70.3

Frequently asked questions

What is the PCD of a Jaguar XJ?

A Jaguar XJ (1968–1973) can have a 5x120.65 or 5x108 PCD depending on the version: check on an original wheel.

Does a Jaguar XJ need a hub centric ring?

The centre bore (hub diameter) of a Jaguar XJ is 74 or 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Jaguar XJ?

The recorded original offset is ET28 to ET49 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Jaguar XJ?

The specified tightening torque is 75 Nm for Ecrous - 1/2 - 20 UN fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Jaguar models

I-Pace 5x108 E-Pace 5x108 F-Pace 5x108 XE 5x108 XF 5x108 F-Type 5x108 XF Serie 5x108 XK Serie 5x108 S-Type R 5x108 X-Type 5x108 S-Type 5x108 XK 5x120.65 All Jaguar →

Does a value look wrong, or is a version missing? Let us know, we check every report.