FRENES

Wheels from Chrysler Grand Voyager on Dodge Nitro: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 71.6 mm centre bore: wheels from Chrysler Grand Voyager bolt on and centre on Dodge Nitro without rings. You still need to check the offset and tyres, detailed below.

Chrysler Grand Voyager2000–2007Dodge Nitro2007–2012
PCD5x114.3 / 5x1275x114.3
Centre bore71.6 mm71.6 mm
ThreadEcrous - 12x1.50Ecrous - 1/2 - 20 UN
Original wheels ≈7Jx17 ET40
≈7Jx17 ET40		 ≈7.5Jx17 ET39

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Chrysler Grand Voyager is compared with the one from Dodge Nitro of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx17 ET40 · 225/55R17 — Fits like the original

    Compared with the original ≈7.5Jx17 ET39 on Dodge Nitro: shock absorber side −5.4 mm, wheel arch side −7.4 mm, tyre diameter −9.5 % : fit it with the original tyre size of Dodge Nitro (245/65R17), not that of Chrysler Grand Voyager. Comparison for guidance only (estimated width). Check in detail

  • ≈7Jx17 ET40 · 225/65R17 — Fits like the original

    Compared with the original ≈7.5Jx17 ET39 on Dodge Nitro: shock absorber side −5.4 mm, wheel arch side −7.4 mm, tyre diameter −3.5 % : fit it with the original tyre size of Dodge Nitro (245/65R17), not that of Chrysler Grand Voyager. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Dodge Nitro (Ecrous - 1/2 - 20 UN), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Dodge Nitro on Chrysler Grand Voyager?