Dodge Nitro PCD

2007–2012

VERIFIED

Centre bore71.6 mm

Offset (ET)ET39

Fixing typeEcrous - 1/2 - 20 UN

Tightening torque135 Nm

Original tyres245/65R17

Hub centric rings 71.6 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Dodge Nitro

A Dodge Nitro (2007–2012) uses a 5x114.3 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 1/2 - 20 UN, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Dodge Nitro without rings. Offset, width, diameter and caliper clearance still need checking.

Dodge Caravan 2001–2007 Dodge Grand Caravan 2001–2007 Jeep Cherokee 2014–2024

Will wheels from another vehicle fit your Nitro?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Dodge Nitro?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Jeep Cherokee 2014–2024 Wheels from Chrysler Grand Voyager 2000–2007 Wheels from TVR Cerbera 1996–2003 Wheels from Jeep Wrangler 1987–2006

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.

Dodge Avenger ⌀67.1 Dodge Caliber ⌀67.1 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1

Frequently asked questions

What is the PCD of a Dodge Nitro?

A Dodge Nitro (2007–2012) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Dodge Nitro need a hub centric ring?

The centre bore (hub diameter) of a Dodge Nitro is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Dodge Nitro?

The recorded original offset is ET39. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Dodge Nitro?

The specified tightening torque is 135 Nm for Ecrous - 1/2 - 20 UN fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Dodge Nitro?

With the same PCD (5x114.3) and the same centre bore (71.6 mm), these include: Dodge Caravan, Dodge Grand Caravan, Jeep Cherokee. Offset, width and rim diameter still need checking for each vehicle.

Other Dodge models

Dart 5x110 Challenger 5x115 Journey 5x127 Avenger 5x114.3 Caliber 5x114.3 Charger 5x115 Magnum 5x115 Magnum 4x4 5x115 Neon SRT4 5x100 Caravan 5x114.3 Grand Caravan 5x114.3 Neon 5x100 All Dodge →

Does a value look wrong, or is a version missing? Let us know, we check every report.