Chrysler Grand Voyager PCD

2000–2007

VERIFIED

Centre bore71.6 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.50

Tightening torque135 Nm

Original tyres225/55R17, 225/65R17

⚠ This model comes with 5x114.3 or 5x127 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 71.6 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chrysler Grand Voyager

A Chrysler Grand Voyager (2000–2007) uses a 5x114.3 or 5x127 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 or 5x127 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/55R17, 225/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x114.3	71.6 mm	—	ET40	225/55R17
Version 2	5x127	71.6 mm	—	ET40	225/65R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Chrysler Grand Voyager without rings. Offset, width, diameter and caliper clearance still need checking.

Chrysler Town and Country 2001–2007 Chrysler 300M 1998–2004 Chrysler Vision 1993–1999 Chrysler Caravan 1991–2001 Chrysler Voyager 1991–2000 Jeep Cherokee 2014–2024 Dodge Nitro 2007–2012

Will wheels from another vehicle fit your Grand Voyager?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Chrysler Grand Voyager?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Chrysler Pacifica 2004–2008 Wheels from Jeep Cherokee 2014–2024 Wheels from Jeep Wrangler 1987–2006 Wheels from Jeep Grand Cherokee 1984–1999

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.

Chrysler Prowler ⌀71.5 Chrysler Sebring ⌀67.1 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1

Frequently asked questions

What is the PCD of a Chrysler Grand Voyager?

A Chrysler Grand Voyager (2000–2007) can have a 5x114.3 or 5x127 PCD depending on the version: check on an original wheel.

Does a Chrysler Grand Voyager need a hub centric ring?

The centre bore (hub diameter) of a Chrysler Grand Voyager is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chrysler Grand Voyager?

The recorded original offset is ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chrysler Grand Voyager?

The specified tightening torque is 135 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chrysler Grand Voyager?

With the same PCD (5x114.3) and the same centre bore (71.6 mm), these include: Chrysler Town and Country, Chrysler 300M, Chrysler Vision, Chrysler Caravan. Offset, width and rim diameter still need checking for each vehicle.

Other Chrysler models

Aspen 5x139.7 300C 5x115 300C 4x4 5x115 Pacifica 5x127 Crossfire 5x112 Town and Country 5x114.3 PT Cruiser 5x100 300M 5x114.3 Prowler 5x114.3 Sebring 5x100 Stratus 5x100 Neon 5x100 All Chrysler →

Does a value look wrong, or is a version missing? Let us know, we check every report.