Wheels from Hyundai Galloper on Nissan Navara: compatible?

Yes, the hub is identical

Same 6x139.7 PCD and same 108 mm centre bore: wheels from Hyundai Galloper bolt on and centre on Nissan Navara without rings. You still need to check the offset and tyres, detailed below.

Hyundai Galloper1999–2003Nissan Navara1998–2004
PCD6x139.76x139.7 / 6x114.3
Centre bore108 mm108 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.25
Original wheels 6Jx15 ET22
6Jx15 ET22
≈7.5Jx15 ET10
≈7.5Jx16 ET25
≈8Jx16 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai Galloper is compared with the one from Nissan Navara of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET22 · 235/75R15 — Fits like the original

    Compared with the original ≈7.5Jx15 ET10 on Nissan Navara: shock absorber side −7.1 mm, wheel arch side −31.1 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • 6Jx15 ET22 · 215/75R15 — Fits like the original

    Compared with the original ≈7.5Jx15 ET10 on Nissan Navara: shock absorber side −7.1 mm, wheel arch side −31.1 mm, tyre diameter −4.1 % : fit it with the original tyre size of Nissan Navara (235/75R15), not that of Hyundai Galloper. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Navara (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan Navara on Hyundai Galloper?