Hyundai Galloper PCD

1999–2003

VERIFIED

Centre bore108 mm

Offset (ET)ET22

Fixing typeEcrous - 12x1.50

Original tyres235/75R15, 215/75R15

Hub centric rings 108 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Galloper

A Hyundai Galloper (1999–2003) uses a 6x139.7 PCD and a centre bore of 108 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 108 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108 mm.
Offset: the original is ET22. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/75R15, 215/75R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	6x139.7	108 mm	6Jx15	ET22	235/75R15
Version 2	6x139.7	108 mm	6Jx15	ET22	215/75R15

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 108 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Galloper without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Navara 1998–2004

Will wheels from another vehicle fit your Galloper?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Hyundai Galloper?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Nissan Navara 1998–2004

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 108 mm, and will not fit if it is smaller.

Hyundai Staria ⌀92.5 Hyundai H-1 H300 ⌀92.3 Hyundai Terracan ⌀106.5 Infiniti QX80 ⌀77.8 RAM RAM 1500 ⌀77.8 GMC Sierra 1500 ⌀78.1 Holden Colorado ⌀99.5 Lexus GX460 ⌀106

Frequently asked questions

What is the PCD of a Hyundai Galloper?

A Hyundai Galloper (1999–2003) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Hyundai Galloper need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Galloper is 108 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Galloper?

The recorded original offset is ET22 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai Galloper?

With the same PCD (6x139.7) and the same centre bore (108 mm), these include: Nissan Navara. Offset, width and rim diameter still need checking for each vehicle.

Other Hyundai models

Inster 4x100 Stargazer 5x114.3 IONIQ 6 5x114.3 Staria 6x139.7 Bayon 4x100 IONIQ 5 N 5x114.3 IONIQ 5 5x114.3 i20 III 4x100 Tucson IV 5x114.3 i10 III 4x100 Nexo 5x114.3 Kona 5x114.3 All Hyundai →

Does a value look wrong, or is a version missing? Let us know, we check every report.