FRENES

Wheels from Renault Master 4 on Nissan NV400: compatible?

Yes, the hub is identical

Same 5x130 PCD and same 89.1 mm centre bore: wheels from Renault Master 4 bolt on and centre on Nissan NV400 without rings. You still need to check the offset and tyres, detailed below.

Renault Master 4from 2024Nissan NV400from 2011
PCD5x1305x130
Centre bore89.1 mm89.1 mm
ThreadM14x1.5M14x1.50
Original wheels 6Jx16 ET66
6Jx16 ET66		 6.5Jx16 ET66

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Master 4 is compared with the one from Nissan NV400 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx16 ET66 · 205/75R16 — Fits like the original

    Compared with the original 6.5Jx16 ET66 on Nissan NV400: shock absorber side −6.4 mm, wheel arch side −6.4 mm, tyre diameter +4.1 % : fit it with the original tyre size of Nissan NV400 (215/65R16), not that of Renault Master 4. Check in detail

  • 6Jx16 ET66 · 215/75R16 — Fits like the original

    Compared with the original 6.5Jx16 ET66 on Nissan NV400: shock absorber side −6.4 mm, wheel arch side −6.4 mm, tyre diameter +6.3 % : fit it with the original tyre size of Nissan NV400 (215/65R16), not that of Renault Master 4. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan NV400 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan NV400 on Renault Master 4?