Nissan NV400 PCD

from 2011

VERIFIED

Centre bore89.1 mm

Offset (ET)ET66

Fixing typeM14x1.50

Tightening torque235 Nm

Original tyres215/65R16

Hub centric rings 89.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan NV400

A Nissan NV400 (from 2011) uses a 5x130 PCD and a centre bore of 89.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 89.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 89.1 mm.
Offset: the original is ET66. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 235 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 89.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan NV400 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Interstar 2002–2010 Renault Master FWD from 2010 Opel Movano 2000–2010 Renault Master 1980–1997

Will wheels from another vehicle fit your NV400?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Nissan NV400?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Renault Master FWD from 2010

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 89.1 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6

Frequently asked questions

What is the PCD of a Nissan NV400?

A Nissan NV400 (from 2011) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Nissan NV400 need a hub centric ring?

The centre bore (hub diameter) of a Nissan NV400 is 89.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan NV400?

The recorded original offset is ET66. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan NV400?

The specified tightening torque is 235 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan NV400?

With the same PCD (5x130) and the same centre bore (89.1 mm), these include: Nissan Interstar, Renault Master FWD, Opel Movano, Renault Master. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Townstar 5x114.3 Qashqai J12 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 Pulsar 5x114.3 e-NV200 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.