Kia Sephia PCD

1995–1998

VERIFIED

Centre bore56.1 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Kia Sephia

A Kia Sephia (1995–1998) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Kia Sephia without rings. Offset, width, diameter and caliper clearance still need checking.

Kia Shuma 1998–2004 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006 Honda Jazz 2002–2008

Will wheels from another vehicle fit your Sephia?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Kia Picanto III ⌀54.1 Kia Stonic ⌀54.1 Kia Picanto I ⌀54.1 Kia Rio ⌀54.1 Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1

Frequently asked questions

What is the PCD of a Kia Sephia?

A Kia Sephia (1995–1998) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Kia Sephia need a hub centric ring?

The centre bore (hub diameter) of a Kia Sephia is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Kia Sephia?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Kia Sephia?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Kia Shuma, Nissan Dayz, Honda WR-V, MG MG3. Offset, width and rim diameter still need checking for each vehicle.

Other Kia models

EV3 5x114.3 EV9 5x114.3 Sportage V 5x114.3 EV6 5x114.3 XCeed 5x114.3 ProCeed 5x114.3 Niro EV 5x114.3 e-Soul 5x114.3 Ceed III 5x114.3 Picanto III 4x100 Stinger 5x114.3 Stonic 4x100 All Kia →

Does a value look wrong, or is a version missing? Let us know, we check every report.