Peugeot iON PCD

from 2009

VERIFIED

Centre bore56.1 mm

Offset (ET)ET35

Fixing typeEcrous - 12x1.50

Original tyres145/65R15

Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot iON

A Peugeot iON (from 2009) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 145/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot iON without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Honda Fit from 2008 Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006 Honda Jazz 2002–2008 MG ZR 2001–2006 MG ZS 2001–2005

Will wheels from another vehicle fit your iON?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Peugeot iON?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from MG MG3 from 2017 Wheels from Mini Coupe 2011–2015 Wheels from Citroen C-Zero from 2010 Wheels from Mitsubishi i-MiEV from 2010

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Peugeot 108 ⌀54.1 Peugeot 107 ⌀54.1 Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1

Frequently asked questions

What is the PCD of a Peugeot iON?

A Peugeot iON (from 2009) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Peugeot iON need a hub centric ring?

The centre bore (hub diameter) of a Peugeot iON is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot iON?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Peugeot iON?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Nissan Dayz, Honda WR-V, MG MG3, Mini Coupe. Offset, width and rim diameter still need checking for each vehicle.

Other Peugeot models

e-208 4x108 408 5x108 208 II 4x108 2008 II 4x108 Rifter 5x108 5008 II 5x108 Traveller 5x108 3008 II 5x108 RCZ-R 5x108 308 SW 5x108 108 4x100 308 II 5x108 All Peugeot →

Does a value look wrong, or is a version missing? Let us know, we check every report.